Sauter TE Thickness Meter
Easy to operate, external sensor for difficult areas
Combined unit with two sensors
The TE(F) Coating Thickness Gauge for use on Non-Magnetic coatings on steel and other metals. Minimum radius on workpiece Convex: 1.5mm and Concave: 25mm.
The TE(N) Coating Thickness Gauge for use on Insulation Coatings on Non-Ferrus metals. Minimum radius on workpiece Convex: 3mm and Concave: 50mm.
Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration (base plate and calibration foils). This results in a superior accuracy of approx. 1 % of the measured value.
Resolution 0.1µm < 100µm; 1µm > 100µm
Minimum measuring thickness: 6mm
Minimum base thickness: 0.3mm
Size: 131 x 65 x 28mm
|24 Month Warranty||Offset-Accur: 1%|
|Auto-Power-Off ||RS232C output|
|Optional PC software||Power supply 4 x 1.5V AAA |
|Base plate & calibration foils||Hard Carrying Case|
|External Sensor||Selectable units|
|Accuracy 3% of Measured Value|
green green green green green